JB-Lighting DMX Controller - Handbuch (Seite 18)

DMX-Controller
18
Chassis bottom: L*B*T 440*128*128 mm
Change of EPROM to install the new Software
Plug out your controller. Open the 4 black screws on the cover.
Turn around the cover (joystick to the right) so that you can see the backview of the board.
Now change the EPROM (You can see it in the middle of board).
Attention: Pay attention that you plug in the EPROM with all its "feet".
Then put the Controller together and check all the functions