Dynacord 2200-3 - Handbuch (Seite 33)

P OWER M ATE
3
33
Display Brightness
The currently set display brightness (from 0% to 100%) is
indicated in the right column. Press the MENU/ENTER ro-
tary encoder to edit the value. Turn the MENU/ENTER ro-
tary encoder to the left to decrease the display
brightness. Turn the MENU/ENTER rotary encoder to the
right to increase the display brightness. Press the MENU/
ENTER rotary encoder to apply the selected brightness.
Pressing the BACK function key returns to the menu.
Pressing the ESC function key returns to effect mode.
Screensaver
The currently set screensaver time interval is shown. Af-
ter the time interval (from 10 seconds to 60 minutes) has
expired the screensaver is activated. Press the MENU/EN-
TER rotary encoder to edit the value. Turn the MENU/EN-
TER rotary encoder to the left to shorten the time
interval, or deactivate the screensaver by selecting Off.
Turn the MENU/ENTER rotary encoder to the right to ex-
tend the time interval. Press the MENU/ENTER rotary en-
coder to apply the selected setting. Pressing the BACK
function key returns to the menu. Pressing the ESC func-
tion key returns to effect mode.
Personalize
Press the MENU/ENTER rotary encoder to open the Set
Device Name dialog. This dialog is used to change the
PowerMate‘s name, which can be composed of a maxi-
mum of 18 symbols and consist of all letters A-Z, a-z, the
numbers 0-9 and special characters.
Turn the MENU/ENTER rotary encoder to the left or right
to edit the highlighted character. Pressing the MENU/EN-
TER rotary encoder accepts the desired symbol and
moves the cursor to the next character. Move the cursor
to the left or to the right by pressing the
 or  function
keys. Select the

symbol or press the OK function key to
quit editing the name.
Pressing the BACK function key returns to the menu.
Pressing the ESC function returns to effect mode.
Tooltips
The indication of Tooltips, e.g. when opening the Speaker
Protection dialog, can be activated or deactivated. Press
the MENU/ENTER rotary encoder to edit the setting. Turn
the MENU/ENTER rotary encoder to select On if Tooltips
should be displayed. Select Off if Tooltips should not be
displayed. Press the MENU/ENTER rotary encoder to ap-
ply the selected setting. Pressing the BACK function key
returns to the menu. Pressing the ESC function key re-
turns to effect mode.
Play USB to 2TRACK
Select „enable“ if the DIGITAL AUDIO INTERFACE should
be used for playback of background music - e.g. using a
PC/Mac - in STANDBY mode.
HINT: If Play USB to 2TRACK is enabled a confirma-
tion prompt appears in the display when acti-
vating STANDBY mode. Press the MENU/ENTER
rotary encoder to confirm.
If „disable“ is selected the signal received via the DIGITAL
AUDIO INTERFACE is muted in STANDBY mode. Pressing
the BACK function key returns to the menu. Pressing the
ESC function key returns to effect mode.
Factory Reset
The PowerMate can be reset to factory settings. Pressing
the MENU/ENTER rotary encoder opens a clear user FX di-
alog box that lets the user choose between YES or NO by
turning the MENU/ENTER rotary encoder. Select YES if all
user effects should be cleared. Select NO if the user ef-
fects should not be cleared. Pressing the MENU/ENTER
rotary encoder opens a safety dialog box „Are you sure?“
that lets the user choose between YES or NO by turning
the MENU/ENTER rotary encoder. If YES has been select-
ed, pressing the MENU/ENTER rotary encoder resets the
PowerMate to its factory settings. If NO has been select-
ed, all parameters stay unchanged and the display re-
turns to the menu. Pressing the BACK function key
returns to the menu. Pressing the ESC function key re-
turns to effect mode.
The following table lists all parameters that are affected
by a reset.
Firmware Info
Press the MENU/ENTER rotary encoder to open the
Firmware Info dialog. This dialog shows the versions of
the firmwares that are actually installed in the PowerMa-
te. Pressing the BACK function key returns to the menu.
Pressing the ESC function key returns to effect mode.
Illustration 3-17: Device Setup dialog
Screensaver Off
Device Setup
Personalize ENTER
Tooltips On
BACK ESC
Display Brightness 100%
Parameter Value
USB Record Routing Live
Equalizer Routing Left and right channel of master output
LPN Processing High
Speaker Protection Power Control off (deactivated)
Footswitch Ctrl. FX 1+2
TAP Button Ctrl. FX 1+2
FX 1 Start Preset 5
FX 2 Start Preset 55
FX 1 MIDI Channel Off
FX 2 MIDI Channel Off
MIDI PrgCh Count 1 - 128
Display Brightness 100%
Screensaver Off
Device Name PowerMate
Tooltips On (activated)
Play USB to 2TRACK Disable
Table 3-18: Factory settings