Dynacord 2200-3 Benutzerhandbuch
Seite 94

P
OWER
M
ATE
3
94
Device in rated condition, unity gain (MIC gain 20 dB), all faders position 0 dB, all pots in mid position, master fader +8 dB, LPN HIGH, amplifier
load 8 ohms, dual channel, mains voltage 230 V/50 Hz or 120 V/60 Hz, unless otherwise specified.
Equivalent Input Noise, MIC input, A-weighted, 150 ohms
-130 dBu
Noise, Channel inputs to Master A L/R outputs, A-weighted
Master fader down
-97 dBu
Master fader 0 dB, Channel fader down
-91 dBu
-89 dBu
-87 dBu
Master fader 0 dB, Channel fader 0 dB, Channel gain unity
-83 dBu
-82 dBu
-81 dBu
Signal/Noise-Ratio, power amplifier, A-weighted, 4 Ohms
105 dB
Output Stage Topology, amplifier
Class D
Equalization
LO Shelving
±
15 dB / 60 Hz
MID Peaking, mono inputs
±
15 dB / 100 Hz to 8 kHz
MID Peaking, stereo inputs
±
12 dB / 2.4 kHz
HI Shelving
±
15 dB / 12 kHz
Master EQ 11-band
(63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12k Hz)
±
10 dB / Q = 1.5 to 2.5
Filter
LO-CUT, mono inputs
f = 80 Hz, 18 dB/oct.
VOICE FILTER, mono inputs
switchable
FEEDBACK FILTER, MON 1/2
70 Hz to 7 kHz, Notch, -9 dB
Speaker Processing
LPN, switchable
Effects
Type
Dual stereo 24/48-bit multi effects processors
Effects presets
100 Factory + 20 User, Tap-Delay
Remote control
Footswitch, MIDI
Display
128 x 64 pixels, OLED
Digital Audio Interface
Channels
4 In / 4 Out
AD/DA Conversion
24-bit
Sampling Rate
44.1 / 48 / 88.2 / 96 kHz
PC Interface
USB2.0, Female Type B
Peak Display
6 dB before Clip
MIDI Interface
5-pin DIN connector, In / Out
Output Power Control (Speaker Protection)
Adjustable longterm RMS Limiter
Protection
Mixer Outputs (Relay controlled)
MON 1, MON 2, MASTER A
Amplifier
Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay,
Back EMF
Switching Mode Power Supply (µC controlled)
Inrush Current Limiters, Mains Over/Undervoltage, Mains Over Current, High Temperature
Cooling
Continuous speed controlled Fans
Phantom Power, switchable in groups
48 V DC
Power Requirements (SMPS with auto range mains input)
100 V to 240 V AC, 50 Hz to 60 Hz
Power Consumption, at 1/8 maximum output power, 4 Ohms
450 W
Safety Class
I
Ambient Temperature Limits
+5 °C to +40 °C (40 °F to 105 °F)
Dimensions (W x H x D), mm
With lid:
510.5 x 164.5 x 571.5
Rack-mount:
483.0 x 135.0 x 443.7
With lid:
663.5 x 164.5 x 571.5
Without lid:
818.5 x 155.0 x 498.5
Weight
Net Weight, without lid
12.5 kg
15 kg
18 kg
Net Weight, with lid
14 kg
17 kg
-
Shipping Weight
17 kg
20 kg
22 kg
Warranty
36 months
Optional Accessories
RMK-1000-3 (Rack Mount Kit for PowerMate 1000)
F01U161506
(DC-RMK1000-3)
-
-
Gooseneck Lamp, 12V/5W, 12”, XLR 4 pol.
F01U118983 (DC-LITLITE-4P)
FS 11 (Footswitch with LED)
F01U100598 (DC-FS11)
Dust Cover
-
-
F01U169467
(DC-SH2200-3)
Property
PowerMate 1000
PowerMate 1600
PowerMate 2200