Laney RB6 - Handbuch (Seite 7)

7
In order to reduce environmental damage, at the end of its useful life, this product must not be disposed of along with normal Household
waste to landfill sites. It must be taken to an approved recycling centre according to the recommendations of the
WEEE (Waste Electrical and Electronic Equipment) directive applicable in your country.
This product conforms to the requirements of the following European Regulations, Directives & Rules:-
CE Mark (93/68/EEC), Low Voltage (72/23/EEC), EMC (2004/108/EEC),
RoHS (EU2002/95/EC), WEEE (EU2002/96/EC)
In the interest of continued development, Laney reserves the right to amend product specification without prior notification.
SPECIFICATIONS
~100V>~120V
~220V>~240V
Features:
Kickback style cabinet Kick back style cabinet
EQ
Presence (+10dB at 2KHz, Peaking)
Lo Paramid (±12dB at 100Hz > 1KHz Peaking) Paramid (±12dB at 100Hz > 1KHz Peak ing) Lo Paramid (±12dB at 100Hz > 1KHz Peak ing)
Yes, Balanced XLR
Yes - (0dBu Nominal) (Series-Insert)
(8 Ohms minimum, internal speaker remains
connected)
Mains Fuse:
Power Consumption
Output Power Rating
Loudspeaker
Bass (±12dB at 40Hz, Shelving)
(8 Ohms minimum, internal speaker remains
connected)
Yes
Enhance
300W
165W
15” Custom Designed Driver + Switchable HF
Horn
Normal & Hi Inputs
Switchable compressor with Activity Light
Enhance
Switchable c ompressor with Activity Light
Treble (±15dB at 3.5KHz, Shelving)
1M Ohm/100pF
Yes, Balanced XLR
Yes
Yes - (0dBu Nominal) (Series-Insert)
Input Impedance
D.I.
Tuner Out
FX Loop
Ex. Loudspeaker Socket
Treble (±15dB at 3.5KHz, Shelving)
Switchable Limiter with status light
T5A L
T2A L
Switchable Limiter with status light
Switchable high frequency horn Switchable high frequency horn
Kick back style cabinet
Bass (±12dB at 40Hz, Shelving)
Hi Paramid (±12dB at 400Hz > 4KHz Peaking)
Unit Weight
Side Handles
Supply Voltage on all models:- Fac tory
Preset
1M Ohm/100pF
T5A L
T2A L
240W
120W
12” Custom Designed Driver + high frequency
horn
Normal & Hi Inputs
RB115 / RB410
Recommended Min Ex speaker Power
Recommended Richter Ex Cabinet
Size
Yes - Comfortable Contoured Grip Yes - Comfortable Contoured Grip
Packed Weight
RB5 RB6
482*420*445 (H*W*D) 565*502*490 (H*W*D)
18.4Kg 26.5Kg
80W 150W
RB115 / RB410
20Kg 29Kg
RB7
~100V, ~120V, ~220V, ~230V, ~240V 50/60Hz
T6.3A L
T3.15A L
450W
300W
Two 10” Custom Designed Drivers + high
frequency horn
Normal & Hi Inputs
Switc hable compressor with Activity Light
Switchable Limiter with status light
Bass (±12dB at 40Hz, Shelving)
Hi Paramid (±12dB at 400Hz > 4KHz Peaking)
Switchable high frequency horn
Treble (±15dB at 3.5KHz, Shelving)
Yes, Balanc ed XLR
Yes
Enhance
27.5Kg
RB115 / RB410
Yes - Comfortable Contoured Grip
458*582*397 (H*W*D)
25Kg
Yes - (0dBu Nominal) (Series-Insert)
(8 Ohms minimum, internal speaker remains
connected)
1M Ohm/100pF
150W