Setting the wake-up time, Switching off the alarm signal – Auriol Z31163 Benutzerhandbuch
Seite 14
14 GB/IE
Blinking display:
Language:
RU
Russian
EN
English
Setting the wake-up time
This device has two wake-up times which can be set. They are set as follows:
1. Press the MODE / SET
20
button briefly in order to get to alarm mode.
Alarm 1
9
and Alarm 2
8
alternate on the display.
2. Now set the alarm you prefer by holding down the MODE / SET
button
20
until the hour display blinks.
3. Press the ▲ °C / °F
17
and ▼ ALARM ON / OFF buttons
16
to set the
desired value.
4. Confirm your setting by pressing the MODE / SET button. Repeat step
3 to set the minutes.
Note: The displays Alarm 1 and Alarm 2 indicate that the respective
alarm is switched on.
5. Switch the alarm time on or off by pressing the ▼ ALARM ON / OFF
repeatedly until the respective display appears or goes out.
Switching off the alarm signal
Press the SNOOZE- / LIGHT button
18
as the alarm signal sounds to
get to SNOOZE mode. The alarm signal sounds again after approx.
5 minutes. This process can be repeated 7 times.