Crivit SP - 33 - Handbuch (Seite 5)

7
LED-rear light SP - 2
LED-REAR LIGHT SP-2
Safety information
• The LED rear light is not a substitute for the light equipment stipulated by the German
standard StVZO (§ 67).
• When used correctly, the LED rear light gives better visibility. The LED backlight
should not be used during rainy weather. It cannot be guaranteed to work if it gets
wet.
• Please only use the LED rear light together with this cycle helmet and always put it
onto the rotating wheel of the size-adjustment system.
• The LED rear light is only intended for personal use.
• Please make sure that, during use, the LED cannot be covered or obscured by collars,
rucksacks or movements of the head.
• The LED light can under certain circumstances come loose without this being noticed,
if it becomes caught on jackets, rucksacks or other objects.
• Please be aware that the battery of the LED light can fall out or become flat. Therefo-
re, check the light regularly for proper functioning.
• The batteries must not be exposed to excessive heat such as sunshine, fire or the like.
In the event that the batteries are
• incorrectly changed there exists the risk of explosion. Only replace the batteries with
the same or an equivalent battery type.
• Parents should ensure that their child also checks to make sure that the LED backlight
is working on a regular basis.
• The LED rear light is not suitable for use by children under 4 years of age.
• The LED rear light is not a toy and its use by children is only permitted if they are
under the supervision of adults.
• The changing of batteries must only be carried out by adults.
• If the battery leaks, avoid any contact with the skin as this can lead to skin irritation.
• Leaking batteries must be disposed of immediately
User information
1. Before the first use
• Take the tail light off the helmet (fig. J). Before the first use, remove the safety strips
from the reverse of the LED tail light. (Fig. I).
130124_4+5-14_ LB07_GA.indd 7 08.03.2013 11:31:01