Ultimate Speed UAMM 12 A1 - Handbuch (Seite 10)

8
2. Switch the heater on by pressing the
heat button 13 again.
Heat will now be produced from inside
the massage mat.
3. To switch the heater off, press the heat
button 13 again.
7. Cleaning and maintenance
7.1 Cleaning the appliance
To ensure your product gives you lasting
service, you should clean it regularly.
Warning! To avoid the danger of
an electric shock or damage:
– Always disconnect the power
supply before cleaning.
– Never immerse the machine in
water.
– Never allow water or cleaning
agent to run into the machine.
Caution! Never use caustic or abrasive
cleaning agents, as they could damage the
parts.
1. Unplug the power plug 2 from the
power socket 6.
2. Clean the massage mat 1 with a clothes
brush.
3. If badly soiled, clean the massage mat 1
as well as the remote control 8 with a
damp cloth. You could also use a little
mild washing-up liquid.
4. Wipe off with clean water.
5. Do not use the appliance again until it is
fully dry.
7.2 Changing the fuse in the car lead
There is a fuse in the car lead 5 to protect
the car’s electrical system. If there is no
power supply and the car lead 5 stops
working, you should check and, if
applicable, change this fuse.
1. Unscrew the cap on the top of the car
lead 5.
2. Remove the fuse.
3. Insert a new type F3AL 250V fuse.
4. Screw the car lead 5 together again.
8. Disposal
8.1 Appliance
The symbol with the crossed-
out rubbish bin on wheels
means that within the European
Union, the product must be
disposed of to a sorted rubbish
collection. This applies to the product and all
accessories which are marked with this
symbol. Marked products must not be
disposed of via the regular domestic waste
but must be handed in to a recycling centre
for electrical or electronic appliances.
Recycling helps to reduce the use of raw
CPe102621 Automassage LB6so-Linksverkehr Seite 8 Montag, 28. Juli 2014 2:19 14