Silvercrest SHLF 2000 A1 - Handbuch (Seite 10)

8
5. Operating
5.1 Displays
The selected function is shown in the display
10 .
A Swivel function is switched on
B Automatic mode. The appliance auto-
matically adjusts the heat output to the
room temperature. The heater switches
off as soon as the room reaches the
required temperature.
C Low heat. The appliance operates at
1000 watts
D High heat. The appliance operates at
2000 watts
E Operating time
F Display of room temperature
G Display of set required temperature
As soon as the appliance is working the
indicator light
25 comes on.
5.2 Remote control
The appliance can be operated using the
control panel
2 or the remote control 19 .
The numbers in the text below refer to the
control panel
2 and the remote control 19 .
5.3 Switching the appliance on and
off
1. Insert the mains plug into a wall socket
that complies with the technical data (see
“9. Technical data” on page 11).
2. Set the mains switch 8 to I to switch the
appliance on.
The mains switch
8 and the display 10
light up.
3. To switch the appliance off completely,
set the mains switch 8 to 0.
5.4 Setting the heat output
1. Select a heat setting to activate the
appliance. To do this, press the function
selector 11 or 23 repeatedly until the
required heat setting appears in the
display 10 as follows:
– Low heat. The appliance
operates at 1000 watts
– High heat. The appliance
operates at 2000 watts
– Automatic mode. The appliance
automatically adjusts the heat
output to the room temperature.
2. To deactivate the appliance,
press the function selector 11
or 23 repeatedly until the top
line of the display 10 disappears and
the operating time E flashes in the
display.
After running on for a few seconds, the
appliance switches to standby mode.
Note:
The appliance continues to
consume power in this state.
5.5 Selecting the temperature
Using the “Increase temperature” button 12
or 20 you can increase the required
temperature to a maximum of 38 °C. Using
the “Reduce temperature” button 13 or 22
you can reduce the required temperature to
a minimum of 6 °C.
F
A B C D
E
G
RP53439 HL mit FB LB3 Seite 8 Dienstag, 13. Juli 2010 3:05 15