Silvercrest SSTB 10 A1 - Handbuch (Seite 34)

31 SSTB 10 A1
GB
Troubleshooting
This section contains important information on fault identifi cation and rectifi cation.
The following table will help to identify and rectify minor faults:
Fault Possible cause Remedy
The device will not
switch on.
The mains adapter is
not connected.
Connect the mains adapter correctly.
The socket is not supply-
ing any power.
Check the house's mains fuse.
No sound.
The volume on the device
or the playback device is
set to minimum.
Increase the volume on the device or
on the playback device.
Playback has not been
started on the playback
device.
Start playback on the playback
device.
You have selected the
incorrect operating
mode. Check whether the correct operating
mode (AUX or Bluetooth
® ) has
been set.
The Bluetooth ®
connection cannot be
established.
Bluetooth ® is not
activated on the play-
back device.
Switch on Bluetooth ® on your
playback device. Please refer to its
operating instructions for more infor-
mation.
The playback device
is not paired with the
device. Pair the devices again (see chapter
Pairing the device with a
Bluetooth
® playback device).
The distance between
the device and the
playback device is
too great.
Ensure that the device is no more than
10 metres away from the playback
device.
The remote control
does not work.
The remote control is
pointing the wrong way.
Point the remote control towards the
infrared sensor on the front of the
device.
The distance between
the remote control and
the device is too great.
Move the remote control closer to
the device.
The battery in the remote
control is fl at.
Replace the battery.