Silvercrest SMA 550 A1 - Handbuch (Seite 10)

7 SMA 550 A1
GB
IE
CY
Heating milk
1) Place the whisk for heating 8 onto the drive shaft inside the carafe. One of
the whisks 4 not required can be clamped and stored in the whisk holder 2.
Keep the other unused whisk 4 in a clean, dry place, for example in a cutlery
drawer.
2) Take the carafe from the plinth 6 and pour the milk in. Thereby, fi ll it with as
much milk as is needed so that at least the minimum mark inside the carafe
is reached. However, never fi ll it with milk beyond the upper MAX-marking
(
). If you do, the appliance may overfl ow.
3) Place the carafe on the plinth 6.
4) Put the lid 1 on.
5) Press the Start/Stop button 5. The integrated indicator lamp glows. The
whisk for heating 8 starts to rotate and thereby heats the milk uniformly.
6) The appliance switches itself off and the integrated control lamp goes out as
soon as the milk reaches a temperature of 60–65°C.
NOTICE
► If you want to stop the preparation process before completion, press the
Start/Stop button 5. If you press the Start/Stop button 5 again, the
preparation process will continue.
7) Take the lid off 1 and pour the hot milk into the desired container.
Wait about 2 minutes before you heat up another portion of milk.
IB_100076_SMA550A1_GB_IE_CY.indb 7 IB_100076_SMA550A1_GB_IE_CY.indb 7 01.04.14 16:27 01.04.14 16:27