Display (7) – Electrolux LAVAMAT 76650 A3 Benutzerhandbuch
Seite 7
9
DELAY START button (STARTUITSTEL-DEPART DIFFERE)
10
Indicator pilot lights
Table of Symbols
= Rinse hold
= Handwash
= Cold
= Child safety lock
Display (7)
7.1
7.2
7.3
7.4
7.5
7.1 Child safety lock symbol
7.2
•
Duration of selected programme : after selecting a programme, the duration is dis
played in hours and minutes (for example 2.05). The duration is calculated automati
cally on the basis of the maximum recommended load for each type of fabric. After
the programme has started, the time remaining is updated every minute.
•
Alarm codes : in the event of operating problems, some alarm codes can be displayed,
for example E20 (see chapter «What to do if...»).
•
End of programme : when the programme has finished a blinking zero is dis
played, the symbol
7.5 (Door locked) disappears on the display, the pilot light of but
ton 8 goes out and the door can be opened.
•
Incorrect option selection : if an option which is not compatible with the set wash
programme is selected, the message
Err is displayed for a few seconds and the yellow
pilot light of button
8 light starts blinking.
•
Delay Start : the selected delay (20 hours max) set by the relevant button appears on
the display for a few seconds, then the duration of the previously selected programme
is displayed. The symbol
7.3 will appear on the display. The delay time value decreases
by one unit every hour. When only 1 hour remains, the time decreases every minute.
7.3 Delay Start - symbol
7.4 Programme progress display : the display shows the different washing pro
gramme phases. After the appliance starts operating, the display show the relevant sym
bol of the washing phase which is running: = WASHING,
= RINSING, = DRAIN
ING, = SPINNING - symbols
7.5 Door lock symbol
This symbol indicates if the door can be opened:
7