Electrolux WASL3T100 - Handbuch (Seite 34)

34 how to run a wash cycle
“Prewash” option
The appliance runs a prewash at 30°C
max. The prewash finishes with a short
spin cycle for cotton or synthetic pro-
grammes, and with an empty cycle for
delicates programmes.
“Rinse plus” option
The washing machine will add one or
more rinses during the cycle.
This option is recommended for people
with sensitive skin and in soft water
areas.
• Temporary :
Press the “Rinse plus” pushbutton .
The option is only active for the selected
programme.
• Permanent :
Hold down the “Prewash” and “De-
lay start” pushbuttons for a few se-
conds. The option is permanently
activated, even if the appliance is swit-
ched off.
To deactivate it, repeat the process.
“Delay start”
This option allows you to delay the start
of a wash programme by 30, 60, 90, 2
hours to 20 hours.
The selected time appears on the dis-
play for a few seconds.
You can change or cancel the delayed
start time at any time before you press
the “Start/Pause” pushbutton, by pres-
sing the “Delay start”
pushbutton
again (0’ indicates immediate start).
If you have already pressed the “Start/
Pause” pushbutton and you want to
change or cancel the delayed start, pro-
ceed as follows :
• To cancel the delayed start and start
the cycle immediately, press “Start/Pau-
se” and then “Delay start”
. Press
“Start/Pause” to start the cycle.
• To change the timer delay period, you
must go through the “Stop”
position
and reprogram your cycle.
The lid will be locked during the delayed
start time. If you need to open it, you
must first pause the appliance by pres-
sing the “Start/Pause” pushbutton. After
closing the lid again, press the “Start/
Pause” pushbutton.
30’