MITSUBISHI ELECTRIC SKM35ZD-S - Handbuch (Seite 5)

– 4 –
Page 10
Page 11, 12
There are two timers, for ON and OFF.
They can be set as desired.
Page 13
When using the timer to switch on, the sys-
tem become operational shortly before the
set time, depending on the room tempera-
ture so that the desired temperature is
reached at the set time.
Choice of operations and features
Characteristics
Amenity facility TIMER procedure
• AIR SCROLL
This function sets the unit at the most suitable angle
for blowing, imitating a natural breeze.
• MEMORY FLAP
Once the flap position has been set, the unit will
memorise it and continue in the same position the
next time.
Page 8
Automatic selection of operating mode.
The Auto mode automati-
cally selects the operation
mode (HEAT, COOL or
DRY), depending on the
room temperature when
switched on.
Adjustment of
airflow
AUTO
Page 9
Cooling by extracting heat from the room.
COOL
Choise of operations
Page 9
The unit draws in heat from the outside air, transfers it inside and
heats the room.
HEAT
Page 9
Drying by extracting damp from the room.
Functioning of micro-computer depends on setting and room tem-
peratures. It dehumidifies while keeping room temperature almost
constant.
DRY
Page 9
Turning up the power operates the air condi-
tioner in the power cooling and heating
mode.
HI POWER mode
Page 9
This is an economic and healthy level of op-
eration.
ECONOMY mode
RWA012A226_En 03.8.27, 6:46 PM 4