Nortel Networks Passport 8306 - Handbuch (Seite 46)

46 Switch operations
Procedure steps
Action
To warm-start the Ethernet Routing Switch 8300 Series (no
diagnostic tests are run), press the Reset button for less than 5
seconds.
To press the Reset button, insert a small pointed object (for
example, an unbent paper clip) into the Reset button hole.
The following figure shows the location of the Reset button on
the Ethernet Routing Switch 8393SF/CPU module.
Figure 5
Reset button on the 8393SF/CPU module
The following figure shows the location of the Reset button on
the Ethernet Routing Switch 8394SF/CPU module.
Figure 6
Reset button on the 8394SF/CPU module
Installing removable flash memory cards
Install a removable flash memory card in an Ethernet Routing Switch
8393SF/CPU module to provide alternative storage media.
Procedure steps
Step Action
1 Position the card with the label facing up and the insert arrow
pointing toward the card receptacle.
Nortel Ethernet Routing Switch 8300
Installation — Chassis
NN46200-309 01.01 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.