Zanussi ZOS 35802 XD - Handbuch (Seite 8)

Setting the clock functions
1. For Duration and End , set an oven
function and temperature. This is not nec-
essary for the Minute Minder
.
2. Press the Selection button again and again
until the indicator for the necessary clock
function flashes.
3. Press + or - to set the time for the neces-
sary clock function.
The display shows the indicator for the
clock function you set. When the set time
ends, the indicator flashes and an acoustic
signal sounds for two minutes.
With the Duration and End func-
tions, the appliance deactivates automati-
cally.
4. Press a button to stop the signal.
5. Turn the knob for the oven functions and
the knob for the temperature to the off po-
sition.
Cancelling the clock functions
1. Press the Selection button again and again
until the necessary function indicator flash-
es.
2. Press and hold the button -.
The clock function goes out after some
seconds.
Using the accessories
Accessories for steam cooking
The steam kit accessories are not supplied
with the appliance. For more information,
please contact your local supplier.
The dietary baking dish for steam cooking func-
tions. The dish has two parts: a hole for the in-
jector (B) and a steel grill to put at the bottom
of the baking dish.
B
The injectors and rubber hose. “A” is the rubber
hose”, “B” is the injector for steam cooking and
“C” is the injector for direct steam cooking.
B A C
Steam cooking in a dietary baking dish
Put the food onto the steel grill in the baking
dish. Add some water. Put the injector (B) into
the rubber hose. Put the injector (B) into the
special hole in the dietary baking dish. Put the
connector attached to the rubber hose (A) into
the steam inlet.
8
www.zanussi.com