Zanussi ZOB 482 XL - Handbuch (Seite 27)

27
Controls
Push-Pull control knobs (Fig. 1)
Some models are provided with push-pull control knobs.
These knobs can be completely sunken inside the control
panel when the oven is not working.
Oven Function (Fig. 2) and Thermostat (Fig. 3)
control knobs
They enable to select the most appropriate type of heating
for the different cooking requirements by appropriately
connecting the heating elements and adjusting temperature
to the required level.
0
OFF position
Oven light
Conventional cooking
Fan assist cooking
Bottom heating element
Inner grill
Full grill
Thermal grilling
Fan forced cooking
Pizza
Mains on Indicator
The mains on light will come on when the oven
function control knob is set.
Thermostat Control Indicator
The thermostat control indicator will come on when the
thermostat control knob is turned. The indicator will remain
on until the correct temperature is reached. It will then cycle
on and off to show the temperature is being maintained.
Safety Thermostat
To prevent dangerous overheating (through incorrect
use of the appliance or defective components), the oven is
fitted with a safety thermostat, which interrupts the power
supply. The oven switches back on again automatically,
when the temperature drops.
Should the safety thermostat trigger due to incorrect use
of the appliance, it is enough to remedy the error after the
oven has cooled down; if on the other hand, the thermostat
triggers because of a defective component, please contact
Customer Service.
0
Fig. 1
Fig. 2
Fig. 3