When the oven is first installed, Before first use – Zanussi ZOB 590 Benutzerhandbuch

Seite 42

Advertising
background image

42 electrolux

42

To set the correct time of day:

a) while the symbol is flashing , set the correct
time of day by pressing buttons “ “ or “ “
(Fig. 1).
The time arrow symbol will disappear about
5 seconds after the correct time is displayed
(Fig. 2).
b) if the symbol is not flashing anymore,
press button

twice (Fig. 3).

Then, proceed as described in point a).

Before first use

Before using for the first time, the oven should be
heated up without food.

To do that, proceed as follows:
— press button

to switch on the oven.

— press button

twice and select the

"Conventional Cooking" function
(Fig. 4).

— set the temperature to 250 °C using the

increasing push button “ “.

— Allow the oven to run empty for

approximately 45 minutes.

— open a window for ventilation.
This procedure should be repeated with the
"Fan Cooking"

and "Full Grill"

function for approximately 5-10 minutes.

Remove all packaging, both inside
and outside the oven, before using
the oven.

When the oven is first connected to the electrical
supply, the display will automatically show 12:00
and the symbol

will flash.

Ensure the correct time of day is set before using
the oven.

When the oven is first installed

Fig. 3

Fig. 1

Fig. 2

Fig. 4

Advertising