How to set the temperature and cooking time, Safety thermostat, The cooling fan – Zanussi ZOU 592 Benutzerhandbuch

Seite 39

Advertising
background image

electrolux 39

39

How to set the temperature and cooking
time

Press button “ “ and “ “ to increase or decrease the
pre-set temperature while the “°” symbol is flashing
(Fig. 7). The maximum temperature is 250°C.
Press button “ “ and “ “ to increase or decrease the
pre-set cooking time while the symbol is flashing
(Fig. 7).

Safety Thermostat

To prevent dangerous overheating (through incorrect use
of the appliance or defective components), the oven is fitted
with a safety thermostat, which interrupts the power
supply. The oven switches back on again automatically,
when the temperature drops.
Should the safety thermostat trigger due to incorrect use
of the appliance, it is enough to remedy the error after the
oven has cooled down; if on the other hand, the thermostat
triggers because of a defective component, please contact
Customer Service.

The cooling fan

The cooling fan is designed to cool the oven and the
control panel. The fan switches on automatically after a
few minutes of cooking. Warm air is blown out through
the aperture near the oven door handle. When the oven
is switched off, the fan may run on after the oven is
switched off to keep the controls cool. This is quite normal.

The action of the cooling fan will depend on how
long the oven has been used and at what tem-
perature. It may not switch in at all at lower
temperature settings nor run on where the oven
has only been used for a short time.

Fig. 7

Advertising