Replacing the oven light, Oven shelves and shelf supports – Zanussi ZOU 592 Benutzerhandbuch

Seite 56

Advertising
background image

56 electrolux

56

Replacing The Oven Light

Disconnect the appliance
If the oven bulb needs replacing, it must comply with the
following specifications:
-

Electric power: 25 W,

-

Electric rate: 230 V (50 Hz),

-

Resistant to temperatures of 300°C,

-

Connection type: E14.

These bulbs are available from your local Service Force
Centre.
To replace the faulty bulb:
1. Ensure the oven is isolated from the electrical supply.
2. Push in and turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the new

one.

4. Refit the glass cover and restore the electrical supply.

Oven Shelves and Shelf Supports

Oven shelf support rails
The shelf support rails on the left and right hand sides of
the oven can be removed for cleaning the side walls.
Removing the shelf support rails
First pull the front of the rail away from the oven wall and
then unhitch at the back (21, 22).
Fitting the shelf support rails
To install, first reattach the rails at the back, then put them
into position at the front and press them into place (23).To
clean the shelf support rails, soak in warm soapy water
and remove stubborn marks with a well wetted soap
impregnated pad. Rinse well and dry with a soft cloth.

Fig. 21

Fig. 22

Fig. 23

Advertising