Xoro HMB 1000 - Handbuch (Seite 45)

HMB 1000 9
English
Quickstart Guide
1. Connect the multimedia player with a TV set. Do
not use any other cable otherwise specified by your
dealer. Plug the phone jack of the yellow-red-white
adapter cable into the AV OUT labelled port und
the 3-wire RCA end into the related AV Input of the
TV set.
You can uses also plug the phone jack of the red-
green-blue adapter cable into the YPbPr labelled
port und the 3-wire RCA end into the related input
of the TV set. Please pay attention of the colours by
connecting the cable.
2.
Connect the power adapter (supplied with the
player) to the side input and to a wall outlet. Do not
use any other device otherwise specified by your
dealer.
3.
Connect an USB-Stick with the USB port on the
rear side or insert a SD or MMC Card in the card
reader (front side).
4.
If necessary and the device does not starts automatically please press
the POWER button on the remote control to start the HMB 1000.
5. By first time starting of the device the HMB 1000 appears the setup
settings.Here you can choose the OSD Language, the Aspect Ratio and
the TV System (the kind of video outputs).
6. If you uses a YPbPr video connection and your TV set is HD Ready
compatible, than you can choose the video putput of 720p. The device
scales up the video signal to a resolution of 1280 x 720. If you using
only Video (CVBS) than please uses the settings PAL CVBS.
7. If the external storages is connected to the HMB 1000, than you can
choose in the SELECT MEDIA menu the kind of content which you want
to playback.
8. Choose the content in the filebrowser (or by the thumbnial view) and
start the playback with the PLAY/PAUSE or ENTER button.