Xoro HMB 1000 - Handbuch (Seite 64)

28 HMB 1000
English
Setup Setting
Movie Repeat Mode
Here you can select between two options, Repeat All and Single Repeat.
TV Type
Here you can define the TV type. Two options are available.
16:9
For 16:9 TV sets
4:3 For 4:3 TV sets
Video Output
Here you can define the video output mode of the HMB 1000.
PAL CVBS
CVBS video out for PAL TV system
PAL 576i YUV video out for PAL TV system
PAL 576p YPbPr video out for PAL TV system
NTSC CVBS CVBS video out for NTSC TV system
NTSC 480i YUV video out for NTSC TV system
NTSC 480p YPbPr video out for NTSC TV system
720p YPbPr video out with 720p resolution
You can change also the video output by pressing the TV MODE button on the
remote control or on the device. Please wait several seconds after you had
pressed the button. Each pressing of the button changes the video output. If
you have trouble by the video output, than press more than one time the button
until a stable picture appears on the screen.
Default
Setting the Default function will reset all options and your personal settings to
the factory defaults and all your personal settings will be erased.
Caution!
When this function is activated, all settings will be reset to factory de-
faults.