Zanussi ZKT663LX - Handbuch (Seite 6)

sensor field function
9 To select a cooking zone.
10 To activate and deactivate the outer ring.
Heat setting displays
Display Description
The cooking zone is deactivated.
-
The cooking zone operates.
The Keep Warm function operates.
The Automatic Heat Up function operates.
There is a malfunction.
The cooking zone is still hot (residual heat).
Lock / The Child Safety Device operates.
The Automatic Switch Off operates.
Residual heat indicator
Warning! The risk of burns from
residual heat!
Daily use
Activation and deactivation
Touch for 1 second to activate or deactivate
the appliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated ( ).
• You do not set the heat setting after you acti-
vate the appliance.
• You spill something or put something on the
control panel for more than 10 seconds, (a
pan, a cloth, etc.). Remove the object or
clean the control panel.
• You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deactivates.
See below.
• The relation between heat setting and times
of the Automatic Switch Off function:
• - — 6 hours
• - — 5 hours
• — 4 hours
• - — 1.5 hours
The heat setting
Touch to increase the heat setting. Touch
to decrease the heat setting. The display
shows the heat setting. Touch and at the
same time to deactivate the cooking zone.
Activation and deactivation of the outer
rings
You can adjust the surface you cook to the di-
mension of the cookware.
To activate the outer ring touch the sensor field
/ . The indicator comes on.
Do the procedure again to deactivate the outer
ring. The indicator goes out.
Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat
6
www.zanussi.com