Zanussi ZKT663LX - Handbuch (Seite 7)

setting for some time (see the diagram), and
then decreases to the necessary heat setting.
To start the Automatic Heat Up function the
cooking zone must be cold (no
in the dis-
play). Touch of the cooking zone again and
again until the necessary heat setting comes
on. After 3 seconds
comes on in the dis-
play.
To stop the function, touch
.
1
2
3
4
5
6
7
8
9
10
11
0
1 2 3 4 5 6 7 8 9
Timer
Count Down Timer
Use the Count Down Timer to set how long the
cooking zone operates for only this one time.
Set the Timer after the selection of the
cooking zone.
You can set the heat setting before or after you
set the timer.
• To set the cooking zone: touch again
and again until the indicator of a necessary
cooking zone comes on.
• To activate or change the Timer: touch
or of the timer to set the time (
00
-
99
minutes). When the indicator of the
cooking zone starts to flash slow, the time
counts down.
• To deactivate the Timer: set the cooking
zone with and touch to deactivate the
Timer. The remaining time counts back to
00
. The indicator of the cooking zone goes out.
• To see the remaining time: set the cook-
ing zone with . The indicator of the cook-
ing zone starts to flash quickly. The display
shows the remaining time.
When the time comes to an end, the sound op-
erates and
00
flashes. The cooking zone deac-
tivates.
• To stop the sound: touch
Minute Minder
You can use the Timer as a Minute Minder
while the cooking zones do not operate. Touch
. Touch or to set the time. When the
time comes to an end, the sound operates and
00
flashes
• To stop the sound: touch
Lock
When the cooking zones operate, you can lock
the control panel, but not
. It prevents an ac-
cidental change of the heat setting.
First set the heat setting.
To start this function touch
. The symbol
comes on for 4 seconds.
The Timer stays on.
To stop this function touch
. The heat set-
ting that you set before comes on.
When you stop the appliance, you also stop
this function.
The Child Safety Device
This function prevents an accidental operation
of the appliance.
To activate The Child Safety Device
• Activate the appliance with . Do not set
the heat settings.
• Touch for 4 seconds. The symbol
comes on.
• Deactivate the appliance with .
To deactivate The Child Safety Device
• Activate the appliance with . Do not set
the heat settings. Touch for 4 seconds.
The symbol comes on.
• Deactivate the appliance with .
7
www.zanussi.com