WolfVision VZ-9plus 3 User Manual - Handbuch (Seite 19)

1. Remove the power cord of the Visualizer
2. Remove the lamp cover by turning then pulling the case
CAUTION HOT - ALLOW THE UNIT TO COOL DOWN!
(>60°C / 140°F)!
3. Lift the security ring
4. Change the lamp
Place the new lamp very carefully into the socket
5. Mount the lamp cover in reverse order (pt. 3-1).
Check position of lightning arm (click-stop device).
Lamp type: Halogen lamp 12V/50W at 5000 h average burning life.
inclusive heat shield and security ring.
WolfVision part no.: 102440
18
WARNING:
Never use strong cleaning agents such as acetone or benzene!
These substances can damage the surface and the anti-reflex coating!
Cleaning
Cabinet: Clean the cabinet by gently wiping it with a soft, lint free cloth.
Lenses: Clean the lenses by gently wiping with a soft, lint free cloth (do not use a paper tissue!). Clean by
breathing on the lens to create moisture then wipe with a lint free cloth (If need be, use a special
optical cleaner only!).
Please note that an infrared remote control can only be used up to a certain distance
from the unit. Objects situated between the Visualizer and the infrared remote control,
and weak batteries, interfere with reception.
If the Visualizer can only be controlled from a close distance, or if it cannot be
controlled at all with the infrared remote control, you may have to change the
batteries.
Open the cover on the back of the remote control and replace the two 1.5 V AA
batteries with new ones.
Check the polarity of the batteries!
Recycle the batteries!
Infrared Remote Control
back (open)
-
+
-
+
X X
MAINTENANCE
Changing the Lamp of the Visualizer
The software (firmware) of your Visualizer (including the o ) can easily be upgraded to the
latest version. The firmware update can be done via USB, Ethernet (LAN) or RS232.
Firmware update files can be downloaded for free at www.wolfvision.com/support. Updates via USB or
Ethernet/LAN can be made with the WolfVision Connectivity Software, updates via RS232 can be made
with WolfVision's Firmware Update Utility. Both tools can also be found under the same link as the firmware
files.
n-screen HELP
Firmware Upgrades