WolfVision VZ-9plus 3 User Manual - Handbuch (Seite 8)

Power-on preset:
The power-on preset is automatically activated when switching on the unit.
The settings are: zoom size: approx. 20 x 15 cm (DIN A5), autofocus: on, auto iris: on.
As soon as the Power Indication LED stays green illuminated, you can start working with the Visualizer.
The behavior of the unit once the power has been supplied or after the POWER key has been pressed
can be changed in the unit's on-screen menu (see page 16).
Setting Up the Visualizer
The working surface of the Visualizer (#2) has a special crystalline white color, which is especially designed
for perfect reproduction of transparencies.
In the following cases, an optional lightbox is recommended:
- If the transparency is very dark
- If the transparency is very wavy and causes reflections
- If the room light causes reflections on a transparency
The optional whiteboard foil can be used for direct annotation with special whiteboard markers. WolfVision
offers spare whiteboard foils.
More information at www.wolfvision.com /Products/Accessories
Working Surface
Slide
Place the slide onto the built-in light field, turn the camera head until
the slide is in the middle of the recorded image and switch on the back
light by touching twice the LIGHT key (#4). The camera zooms the
slide automatically in. The camera automatically focuses on the
slide.
Picking-up Slides
The synchronized laser markers makes positioning of objects very
easy by marking the corners of the picked-up image on the working
surface. The laser center marker zooms synchronous to the camera
zoom and shows the 16:9 pick-up size of the camera.
Additionally the built-in LCD monitor eliminates the need for an extra
control monitor. This monitor can show different signals, like stored-
images or life-image (selectable in the on-screen menu - see page
16). The on-screen menu is also visible on this LCD monitor.
Positioning on the working surface
1. Connect the power pack to the power-input (#25).
2. Connect your display device (projector, monitor, video
conferencing unit etc.) to the appropriate output of
the Visualizer (#19, #21, #22 or #23).
IMPORTANT:
For choosing the right output please read the
detailed description on page 14!
3. Using the pull pad (#10) only to lift the arm upwards.
Camera head and light automatically move into the
working position. The VZ-9plus³ is switched on
automatically. (Alternative the Visualizer can be switched on by
touching the POWER key.)
IMPORTANT:
To fold the Visualizer, use pull pad only (#10)!
#9 PRESET
FREEZE
FOCUS-
FOCUS+
EXTERN
MENU ? AF
Monitor
7
#9 PRESET
FREEZE
FOCUS-
FOCUS+
EXTERN
MENU ? AF