WolfVision VZ-9 User Manual - Handbuch (Seite 12)

Built-in LCD Monitor
The built-in LCD monitor can show different images like live image, external image,
frozen/stored image and the on-screen menu. The displayed image can be selected in the
on-screen menu.
The brightness of the LCD monitor is also adjustable in the on-screen menu.
SWITCHING TO NEGATIVE, NEGATIVE/BLUE and
BLACK/WHITE
The output image of the Visualizers can be switched from positive to negative in the
on-screen menu. In addition, the background of a negative image can be switched to
blue for better readability of text. You can also switch between color and black and white
in the on-screen menu.
TIP: If you often switch to negative, negative/blue or black/white images you can
assign this function to one of the Preset keys
(see page 9) in the on-screen menu.
Auto Power off
In the "Power control" settings of the on-screen menu you can select that the Visualizer will
be automatically switched off, if it is not to be used for a certain amount time.
Changing the standard contrast (color) settings
If the picture or the colors on your screen appear to be too dark, you can lower the overall
contrast of the picture in the "Color settings" menu of the on-screen menu. The settings can
be made separately for the normal mode and the text-mode.
Firmware Upgrades
The software (firmware) of your Visualizer (including the o ) can easily be
upgraded to the latest version.
Firmware update files can be downloaded for free at .
Updates via USB can be made with the WolfVision USB Software, updates via
Ethernet/LAN require the WolfVision Ethernet Software and updates via RS232 can be
made with WolfVision's Firmware Update Utility. All 3 programs can also be found on our
homepage.
n-screen HELP
The firmware update can be done via USB, Ethernet (LAN)
or RS232.
www.wolfvision.com/support
For RS232 connection, use a crossed serial RS232 cable (Nullmodem-cable).
RESET OF ON-SCREEN MENU SETTINGS
All settings in the on-screen menu can be set back to the factory defaults. "Reset" is one
item in the on-screen menu. In case you can not read the menu on a screen you can also
set the unit back to the factory defaults by simultaneously pressing both FOCUS-keys on
the camera head
(#26) and the Number 4 (back-arrow) key (#41) on the remote control.
If you only want to reset the item that is currently selected to the default setting, press the
Number 5
(#42) key for 2 seconds!
11