WolfVision VZ-9 User Manual - Handbuch (Seite 3)

Connectors (#8):
1 Camera head
2 Light
3 IR-receiver
4 Camera keys, zoom wheel (
see page 3)
5
6
7
8
9 Light field for slides
10 Preview monitor
11
12 Pad to rotate the VZ-9 (
see page 7)
13 IR-remote control
Close up lens for camera
Pull pad to lift the arm up/down
Power and light on/off key (
see page 3)
Connectors
(on the back as shown below)
Working surface
Setting up
Power-on preset:
The power-on preset is automatically activated when switching on the unit.
The settings are: Zoom size approx. 20 x 15 cm (A5), Autofocus on, Autoiris on.
14 Serial control input RS232 (see page 12)
15 External input for computers (see page 8)
16 PAL/NTSC Y/C (S-Video) output (see page 6)
17 DVI output (see page 5 and 12)
18 RGB output (see page 5)
19
20
21
22 USB-port (see page 12)
LAN-port (see page 12)
Power connection 12V
DC-output for lightbox (see page 7)
1. Connect the power pack to the power-input (#21).
2. Connect your display device (projector, monitor, video
conferencing unit etc.) to the appropriate output of the
Visualizer
(#16, #17, #18, #19 or #20).
IMPORTANT:
For choosing the right output please read the detailed
description on page 5!
3. Pull the arm upwards using the pull pad (#6).
Camera head and light automatically move into the
working position. The VZ-9 is switched on
automatically.
ENGLISH
1 1 4
2 2
8 9
10
12
6
5
7
11
13
3
3
12
2
7
POWER LB S-VIDEO EXTERN IN USB RS 232 DVI LAN
15 18 16 19 21 22 17 20 14
RGB