WolfVision VZ-27 User Manual - Handbuch (Seite 13)

WHITE BALANCE ADJUSTMENT
Each time the lighting condition changes, the user should adjust the white balance of the Visualizer's camera, in
order to optimize the color reproduction. The Visualizer's top- and bottom light have the same color temperature
so normally a new white balance adjustment is not necessary when changing from one light to the other, but if
there is also room light or sun light shining on the working surface, the white balance should be adjusted.
Top light: First, zoom in on a white object (for example a white paper) until there is only white on the screen.
Then press the W.B. key (#22).
Bottom light: Turn on the bottom light with the LIGHT key (#21). Remove everything from the working surface.
Zoom to the smallest picture. Then press the W.B. key (#22).
You can adjust the white balance either for the top or for the bottom light and it works well with both lights.
When the white balance adjustment is finished successfully the message "WHITE OK" appears on the monitor
after a few seconds. The new white balance is stored automatically and is preserved even if the power supply
is interrupted.
IMPORTANT
TRANSPORTATION
Please make sure that you pack up the Visualizer in the supplied box as explained in this graphic.
This is very important to avoid damage to mirror, arm and other sensitive parts of the unit!
IMPORTANT
13