WolfVision VZ-27 User Manual - Handbuch (Seite 4)

#1 Arm
#2 Base mirror
#3 Top mirror
#4 Control pannel
#5 Synchronized lightfield (Top light)
#6 Remote Control
#7 Ventilation
#8 Air extraction
#9 Working surface with built-in
Bottom light (removable)
#10 Connectors (on the back - see next page)
#11 Lamp exchange cover
(under the removable bottom light)
This is a combined user manual for the professional WolfVision Visualizer models VZ-27 and VZ-57.
Most chapters apply for both units (except otherwise noted).
#12 Upper MIRROR up and down (for scrolling)
(C
#13 ZOOM keys
#14 Three user programmable PRESETS
(stored by pressing one of the keys for 4
seconds, recalled by pressing quickly)
#15 IMAGE TURN key (see page 10)
#16 TEXT Enhancement key
(improves the contrast for better readability)
#17 IMAGE (switches the output image on and off)
#18 MACRO (for bigger enlargements - see page 8)
#19 Manual FOCUS adjustment (see page 7)
#20 RESET (activates the Power-on preset)
an also be moved by hand! This does not
cause any harm to the motor of this mirror!)
#21 LIGHT (switches between "Top light",
"Bottom light" and "Light off")
#22 Manual WHITE BALANCE adjustment
(see page 13)
CONTROL PANEL:
ATTENTION: Check which Visualizer model you have!
#23 MENU (activates the on-screen menu
- see page 14)
#24 Manual IRIS (brighter and darker picture)
#25 HELP (activates the on-screen help for the
on-screen menu. This key is only visible after
pressing the MENU key (#23) for 1 second
#26 SELECT keys for on-screen menu (only visible
after pressing the MENU key (#23) for 1 sec.)
#27 Motorized ARM up and down
#28 (Standby) POWER on and off
#29 Power LED light (red=off, green=on)
Only on remote control:
#50 EXT/INT key - Switches between Visualizer
image and external input (see page 10)
#51 ALL-key for displaying all 9 pictures of the
memory as split image (see page 10)
#52 MEMORY keys 1-9 (see page 10)
REMOTE
CONTROL:
4