WolfVision VZ-C32 Installation - Handbuch (Seite 13)

Should it be required to dismantle the Ceiling Visualizer following relocation or aftersales service,
please follow the instructions outlined below.
Turn off the unit at the main switch and press the release button (fig.14).
Release the Visualizer to the opened holding position (fig.15).
Unplug all connected cables and remove them from the ceiling mount (fig.16).
Remove all cables completely from the ceiling mount.
Remove the ceiling mount once all cables are completely removed.
fig.14 fig.15
fig.16
Remove both Allen screws and stabilization ring (fig.17)
Press the safety lever to the top by using a normal slot screw driver (fig.18) and turn the lever to
the centre position by 60 degrees (the lever must click in pulled position).
The Ceiling Visualizer can not be removed without following this process.
Subsequently, the Visualizer must be moved back towards the ceiling and locked in place. The
Visualizer can now be removed by turning it by 90 degrees. Please be aware of the weight of
the unit of 13 kilos (29 pounds) when detaching it from the ceiling. The safety lever will
automatically reactivate with the next installation and will secure the Visualizer from detaching
itself.
DISMANTLE OF THE CEILING VISUALIZER
12
fig.17
fig.18