Electrolux EOB3000BAX - Handbuch (Seite 19)

Installing the door and the glass panel
When the cleaning is completed, install
the glass panel and the oven door. Do the
above steps in the opposite sequence.
The screen-printing zone must face the
inner side of the door. Make sure that af-
ter the installation the surface of the glass
panel frame on the screen-printing zones
is not rough when you touch it.
Make sure that you install the internal
glass panel in the seats correctly. Refer to
the illustration.
9. WHAT TO DO IF…
WARNING!
Refer to "Safety information"
chapter.
Problem Possible cause Remedy
The appliance does not
operate. The appliance is not acti-
vated. Activate the appliance.
Refer to the chapter "Dai-
ly Use".
The appliance does not
operate. The fuse in the fuse box
is released. Do a check of the fuse. If
the fuse is released more
than one time, contact a
qualified electrician.
The oven lamp does not
operate. The oven lamp is defec-
tive. Replace the oven lamp.
Steam and condensation
collect on the food and in
the oven. You left the dish in the
oven for too long. Do not keep the dishes in
the oven for longer than
15 - 20 minutes after the
cooking ends.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre. The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
ENGLISH 19