Sony FWD-50PX3 - Handbuch (Seite 11)

9
FWD-50PX3
Code Table (1-a)
[a]Function [b]Range/Switch Code Command
Control
Enquiry Standby Power On
0x74 Digital Signal Detect 0x00 VIDEO No Yes Disable Enable
(DVI/HDMI/etc.) * 6
0x01 PC
0x75 Signal Status * 7 0x00 Stable No Yes Disable Enable
0x01 Unstable/No Signal
0x76 VIDEO Signal Detect 0x00 NTSC No Yes Disable Enable
0x01 PAL (SECAM)
* 3: Option3 Slot is Not Connect Now.
* 4: Auto Signal Detect becomes Disable. When Option Slot is connected, Option command is Enable.
* 5: Restricts a part of keys operation following below.
[Remote Commander]
Menu, Picture, Sound, ECO (Power Saving), Sleep, Freeze, Contrast
+ / _ ,Brightness, Chroma, H Shift, V Shift, V size, PAP
[Main]
Menu
* 6: Digital Signal Status is Enable for Digital Input Signal Detect Function only in Stable.
* 7: Digital Signal or VIDEO Signal is Enable. Return Signal Status of Active Window.
NOTE: modified RS-232 protocol
If “everyday” is selected, the enable bit for “everyday” should be copied to the bit for each day of week.
5. Analog Signal Detect Function
(a) Mode Control
Syntax Header Category Function Data1 Data2 Check Sum
Enquiry 0x83 0x00 Code Table (1-a) [a] Code Table (1-d) 0xFF 0xXX
Answer Header Answer Return to Data Size Return Data1 Data2 Check Sum
Enquiry 0x70 0x00 0x02 Code Table (1-a) [b] 0xFF 0xXX Completed
Code Table (1-a)
[a]Function [b]Range/Switch Code Command
Control
Enquiry Standby Power On
0x78 Analog Signal Detect 0x00 VIDEO No Yes Disable Enable
0x01 PC
Code Table (1-d)
Input Select
0x00 Main
0x01 Sub
0xFF Present input
1-a[b]
When input is no signal or not supported signal, return value is Video(0x00).