Festo Неполноповоротные приводы DRQD-6...12 - Handbuch (Seite 35)

DRQD-6/ ... /12-...
Festo DRQD-6/ ... /12-... 0109a English
35
4. Fasten the moving load onto the drive
output shaft (tightening torque see
Fig. 21 and Fig. 22).
DRQD-... 6 8 12
Nm 0.7 1.2
Fig. 21
Make sure that the following points are
observed:
DRQD-... with
Feather key DRQD-... with
Flanged shaft
– The moving mass
cannot slide down
from the drive out-
put shaft (use
thread at front)
– The moving mass is
fastened with at
least 2 screws (fit-
ting
4 provided)
Fig. 23
Warning
Ejected bolts can cause injury.
S Make sure that the threaded sleeve
6 is never unscrewed completely (max.
unscrewing length see Fig. 25).
DRQD-... 6 8 12
L max (mm) at
DRQD-...-J20
8 9 10
L max (mm) at
DRQD-...-J60
12 13 14
S min Flush
Fig. 25
Fig. 20
Fig. 22
4
1,2 Nm
Fig. 24
6
S