Festo Неполноповоротные приводы DRQD-6...12 - Handbuch (Seite 36)

DRQD-6/ ... /12-...
Festo DRQD-6/ ... /12-... 0109a English
36
Please note
If the threaded sleeves are screwed in too far, the DRQD-... will be damaged.
S Make sure that the maximum screw depth is observed (flush with locking
nut).
Adjusting the end positions:
1. Unscrew the locking nuts 6 of the
threaded bolt to be adjusted.
2. Screw the moving load by hand into an
end position.
3. Use a hexagon socket wrench to screw in
the threaded bolt, until the desired end
position is reached.
The following settings are possible:
Activity Reaction Setting range in
relation to basic
factory setting
DRQD-
...-J20
DRQD-
...-J60
Turn in
clockwise
direction Angle of
rotation is
reduced - 20° - 60°
Turn in
anti-clock-
wise direc-
tion Angle of
rotation is
increased + 6° + 6°
Fig. 29
Fig. 26
Fig. 27
Fig. 28