WIKA CPH6600 - Handbuch (Seite 25)

25 WIKA operating instructions, model CPH6600
14005103.03 11/2012 GB/D
GB
6. Commissioning, operation
6.5 Factory settings
The calibrator is delivered with five commonly-used factory settings.
These settings are shown below.
Any of these settings can be changed and saved by the user.
Setting 1:
The upper display is set to [P1] mode and the lower is set to "mA"; the middle is off.
Setting 2:
The upper display is set to [P1] mode and the lower is set to "RTD"; the middle is off.