Festo DRQD-40 ... 50-... - Handbuch (Seite 56)

DRQD−...
Festo DRQD−... 0907e English
56
Adjustment with the mid−position module for DRQD−...−Z1:
1. Manually press the protruding piston
rod aE completely into the mid−position
module.
2. Insert the long side of the Allen key into
the hollow piston rod aE.
3. Rotate both concealed screws aF into the
piston rods aE as far as possible in an
anti−clockwise direction (status as delivĆ
ered).
4. Turn the respective screw aF for adjustĆ
ment of turning capacity in the clockwise
direction until the drive shaft is in the
desired mid−position.
When doing this, the following
torques are to be maintained:
DRQD−... 16 20 25 32 40 50
Min. torque [Nm] 0.32 0.45 0.45
Max. torque [Nm] 5 8 8
Width across flats 3 4 5
Fig. 32
Fig. 31
aE
УУУУ
УУУУ УУУУ УУ УУ УУ УУ О О
УУУ
УУУ
УУ
ООО
ООО
aF