HYDAC HPG 3000 - Handbuch (Seite 14)

Benutzerhandbuch HYDAC Programmiergerät “HPG 3000-000“ 24.11.2005
User Manuel HYDAC Programming unit “HPG 3000-000“
13
1. Functions of the HPG 3000
• Read actual switching output settings from pressure switch EDS 410*
• Changing the switching output settings of the EDS 410* inside the HPG 3000
• Transfer changed datas into the EDS 410*
* EDS 410 with programmable input (Version 5)
2. Operating keys of the HPG 3000
4-digit
Keys for switching output settings
digital display
and skrolling through the menu
SP1 SP2
HYDAC
mode
PSI MPa bar
Display of the
pressure unit
3. Connect EDS 410 to HPG 3000
The connection between the HPG 3000 and the EDS 410 has to be made with the connection
cable ZBE 30-02, which is included in the scope of delivery of the HPG 3000.
After switch on of the power supply the message “HPG” appears in the display for about 2sec,
after that the unit switch directly into the online mode.
By pressing the mode – key the datas of the EDS 410 will get read into the programming unit.
This process getting confirmed by the message “rd“ (receive data) in the display.
Note:
• If there is no EDS 410 with programmable input connected, the error message “Er.21” appears
in the display. This message has to be confirmed by pressing the mode – key.
Er.21 = missing connection
2 s