HYDAC HPG 3000 - Handbuch (Seite 17)

Benutzerhandbuch HYDAC Programmiergerät “HPG 3000-000“ 24.11.2005
User Manuel HYDAC Programming unit “HPG 3000-000“
16
5. Error messages
Are the switching point settings and the hysteresis settings incorrect, means, the result of the
switch back point is out of the setting area, then the error message “Er.01” appears in the disply.
The setting of the switching point and the hysteresis need to be readjusted.
If there is no EDS 410 with programmable input connected, the error message “Er.21” appears in
the display. This message has to be confirmed by pressing the mode – key.
Abbreviations:
= incorrect switching point and hysteresis setting
= missing connection to EDS 410