Lenze CPC 5100 - Handbuch (Seite 50)

Mechanical installation
Important notes
4
l
50 LDCDS−CPC5100 DE/EN 1.1
4 Mechanical installation
4.1 Important notes
The installation must be carried out by qualified, skilled personnel familiar with the
applicable national standards.
4.2 Mounting steps
Proceed as follows for the mounting:
1. Check that the installation location meets the operating conditions specified in the
technical data (
¶ 47).
2. Prepare the control cabinet mounting plate.
– Observe the dimensions and mounting clearances (
¶ 49).
– There must be sufficient space for inserting disks into or ejecting them from the
DVD drive.
– The ventilation slots must not be covered.
3. Screw the device onto the mounting plate.
– The mounting location and the installation material must guarantee a permanent
mechanical connection.