Lenze CPC 5100 - Handbuch (Seite 55)

Electrical installation
Connecting and disconnecting the battery pack of the optional UPS
5
l
55 LDCDS−CPC5100 DE/EN 1.1
5.3 Connecting and disconnecting the battery pack of the optional UPS
For the UPS functionality the battery pack has to be attached before commissioning the
IPC.
If the IPC is disconnected from the mains for a longer time (e. g. transport, storage), the
battery pack has to be disconnected, as otherwise the rechargeable batteries of the battery
pack may be damaged by an exhaustive discharge.
Netzteil Typ A
AUDIO
VGA
MIC
USB
USB
IN OUT
LAN
MOUSE
COM1
KEYB
X 2 X 2
X 1 X 1
POWER STANDBY
HD
RESET CTRL
SLOT
A
B
C
D
E
F
G
1
1
2
I 0
3
0
CPC5100−009
How to connect or disconnect the battery pack
0:
1. Remove the two screws
1.
2. Carefully push the housing cover
2 slightly to the right and pull it forward (for
vertical mounting see illustration).
3. Connect or disconnect the connector
3.
4. Carefully place the housing cover
2 on the housing.
5. Tighten the two screws
1.