Lenze HMI Designer Getting Started - Handbuch (Seite 39)

HMI Designer
L
PV EDBHMI-DEEN DE/EN 4.0
QKRKN léÉå л~гйдЙ йкзаЙЕн
• Select the command File  Open to open an existing project.
Ó Mark the sample project H310_93xx.vts in the subdirectory Samples in the Open dialog box.
Ó Click Open to open the selected project in HMI Designer.
c
d
e
c Keypad d CAN port of the keypad e CAN connection of the controller
The components included in the project are displayed.
The project
H310_93xx.vts contains the following components:
• Keypad H310
• CAN port of the keypad
• CAN connection of the controller
QKRKO aÉÅä~êÉ `^k ЕзееЙЕнбзе зС нЬЙ ЕзенкзддЙк
In the project H310_93xx.vts the CAN connection of the controller is declared as slave.
When the controller is a master, you have to declare the CAN connection to be a master.
1. Mark the component “93xx” in the project area and press
<Del> to remove the component.
2. Open the directory Lenze\Controllers in the component area.
3. Click on the component “DEVICE_CAN_MASTER”, keep the left mouse button pressed and drag
the icon to the project area to the component “CAN port”.
4. Release the mouse button when the component “CAN port” is highlighted. The component
“DEVICE_CAN_MASTER” is added. The controller is declared as master.