Clearaudio MASTER REFERENCE - Handbuch (Seite 26)

Master Reference
Bedienungsanleitung / USER MANUAL
Seite/Page 26 © clearaudio electronic GmbH 2007
Now place the three belts, one on each pulley of the motors. For the first belt use the motor
plugged into the APG (the power supply) at the number one. Then use for this motor the first
therefore cutted diameter in the pulley. When you place the second belt, use the motor
which is connected as the number two into the APG and turn the belt around the second
(middle) diameter of the pulley. For the third belt use the last motor (connected as number
three into the APG) and the third (upper) diameter of the pulley.
The following adjustment is very important:
Should the air bubble in the level gauge not be in the black circle (see at the blow up),
please ensure then that your underground so will be according aligned. Only if the turntable
will be aligned you will receive the optimum on sound.
1
3
2