Clearaudio VTA LIFTER 2 - Handbuch (Seite 5)

VTA – Lifter 2
NEW
User manual / Bedienungsanleitung
Seite/Page 5
 clearaudio electronic GmbH 2013
Now turn the level completely to the “+” side, to tighten the tonearm with the two (2)
delivered maggots screws (see pic. 4 + 5) on the side of the VTA-Lifter (2) .
2.3 Height adjustment
To adjust the height of the tonearm turn the level either to the right
side (marked with a “+”) to heighten the tonearm or to the left side
(marked wit a “-“) to reduce the height of the tonearm. With the new
VTA-Lifter (2) you can adjust the height even while you are playing
music.
2.4. Installation on a Champion base
For the installation please remove the tonearm and the base from your turntable.
Fit the VTA-Lifter (2) from above through the hole of the base.
Tighten the VTA-Lifter (2) with the delivered cylinder head bolts and the hex key wrench
(3 x 8) Bottom side of the Champion – base (see pic. 8).
Now you can mount the Champion base on the turntable chassis.
To finish the installation please proceed further as described on pages 4 / 2.2 and 5 / 2.3.
Pic. 7: Mounting the VTA-Lifter in a Champion base Pic. 8: Tighten the VTA-Lifter in a Champion base
Bottom side of the Champion
base
to increase
to reduce
Pic. 6: Height adjustment
Pic. 4: Tighten the tonearm
+
-
Pic. 5: Tighten the tonearm