Clearaudio VTA LIFTER 2 - Handbuch (Seite 6)

VTA – Lifter 2
NEW
User manual / Bedienungsanleitung
Seite/Page 6
 clearaudio electronic GmbH 2013
2.5 Installation on other turntables
If you have a turntable from an other manufacturer please refer to your nearest clearaudio
dealer or contact Clearaudio directly (address on page 6).
If you have any technical difficulties Clearaudio will be glad to take the technical changes
of your turntable (see contact address page 6).
3. Service and special instructions
In case of any necessary, service for all Clearaudio products should be done by authorized
personal only.
In case of any repair, Clearaudio products need to be send to your nearest authorized
Clearaudio distributor, dealer or directly to the Clearaudio factory.
clearaudio electronic GmbH
Spardorfer Str 150
91054 Erlangen
Germany
Tel/Phone: +49 9131/40300100
www.clearaudio.de
www.analogshop.de
[email protected]
Send / ship the VTA-Lifter (2) always and only in the original packing !
Only in the original packing Clearaudio can provide the warranty.
4. Technical Data
Inserted materials VTA-Lifter (2): stainless steel
Weight: Approx. 200 gram
Dimensions:
Lenght:
Width:
Height:
Inner diameter:
93 mm / 3,66 inch
59,5 mm / 2,34 inch
46 mm / 1,81 inch
24,9 mm / 0,98 inch
Warranty: 5 years
Clearaudio electronic is not responsible for typographical errors in descriptions. Technical specifications subject to change or
improvement without prior notice. Availability as long as stock lasts. Copies and imprints- also only in extracts – require written
conformation through Clearaudio electronic GmbH; Germany
Version: November 2013