ALTANA Auto Film-Applic No2101 - Handbuch (Seite 25)

1. Safety Information
!
Adjustments, Replacement of
Parts, Maintenance and Repairs:
Removing covers or components,
except where this can be done
without tools, may expose live parts.
Connection terminals may also be
live. Before replacing parts or
performing any adjustment,
maintenance or repair for which the
unit must be opened, make sure the
unit is disconnected from any power
source. Any adjustments,
maintenance or repairs that must
unavoidably be performed with the
power on and the unit open should
be left to qualified personnel familiar
with the possible hazards.
Capacitors inside the unit may still
carry a charge even after the unit
has been disconnected from the
power source.
Before switching on the unit, make
sure the voltage setting on the unit
matches the voltage of your power
outlet. The unit must be plugged
into a grounded outlet. Do not
eliminate the ground protection by
using an ungrounded extension
cord.
Warning!
Any break in the ground conductor
either inside or outside the unit, or
any loosening of the ground
connection, may make the unit
hazardous to operate. Never break
the ground connection intentionally!
Attention!
For USA use only: Detachable
Power Supply Cord - Listed, type
SVT or SJT, 18 AWG. Terminates
in parallel blade grounding type plug
125 V, 15 A configuration.