ALTANA Auto Film-Applic No2101 - Handbuch (Seite 31)

2 memory keys permit commonly
used traverse speeds to be stored.
They can be recalled instantly at the
touch of a button. The instrument is
supplied factory set as shown
below.
Memory 1 100 mm/sec
Memory 2 250 mm/sec
Traverse speeds 50 to 500 mm/sec
can be selected from the front key-
pad in increments of 10 mm/sec.
The microprocessor-controlled
eletronics of this instrument
ensures accurate speed control
under all operating conditions.
During a "drawdown" the actual
traverse speed of the carriage is
indicated on the LED display.