AMT Datasouth Fastmark M3 - Handbuch (Seite 35)

~ 35 ~
Setting WiFi configuration
1.
Connect the printer and PC via USB cable.
2.
Turn ON printer and start DiagTool utility.
3.
Select “Wireless” tab and click on “Built-in wireless module” item.
4.
Enter the new WLAN settings in the editor.
5. Press “Set” button to set the new settings to the printer.
6.
Press “Get” button to get back the settings. Make sure the Bluetooth
module settings are set properly.
7.
The Wi-Fi LED will turn ON blue (the Wi-Fi, icon will be shown for LCD
panel) if device has been connected.
8.
Print out the self-test page to confirm correct settings.
9.
Remove the USB cable and print WiFi data for test.
WLAN SSID Dlink
WLAN Encryption
WLAN Key
WLAN DHCP ON
3
4
5 6
DiagTool Utility via WiFi :
After initial setup, DiagTool calibration and user settings
can be made using the WiFi interface connection.
(optional)