Bullard RXE - Handbuch (Seite 7)

FXE FIRE HELMET USER
INFORMATION GUIDE
www.bullard.com 7
W
arr
anty/A
ccessories/Certifidcation
Warranty
Bullard provides a warranty for a 24 month period from the date of purchase in
respect to manufacturing and material faults. The helmet will be repaired, replaced or
credited at the discretion of Bullard. The helmet must be sent to us carriage free as a
precondition for claiming warranty; it must not be modified and the damage must not
have resulted from improper use.
Bullard is not liable for damage, failure in use or other indirect, accidental,
consequential or special costs, expenses or damages which could arise for the buyer,
even if Bullard has been informed of the possibility of such damage.
Bullard will not be held liable for damage that occurs during hot fire training.
Use Bullard Nomex helmet covers for those helmets.
Colors
Lumenescent Yellow, Red 3020, Green PMS 362, Blue 5015, White 9016, Black 9004,
Accessories and Replacement Parts
When fitted with another item of personal protective equipment or with an accessory
(other than as supplied by the helmet manufacturer for use with this helmet) a helmet
marked as complying with EN443 might no longer satisfy all clauses of the standard.
All accessories and replacement parts are designed for the use with your Bullard
Magma helmet.
Do not use them separately or with other brand
or model helmets. Do not use any accessories
or replacements parts other than listed below.
Accessories and replacement parts
are subject to technical changes
and completion. Please check www.
bullardextrem.com for latest information.
R637 Headring
R175
Chin strap
R151 Visor adapter
R160 Ratchet cover
R635 Brow pad
R310 Visor 10 cm Type A
R330 Visor 10 cm Type A
R325 Visor 15 cm Type B
R340 Visor gold 15 cm Type B
R729 Neck protector Nomex
XTO Goggle
R533
Reflective stripes
Ear Neck Protectors
All available variants
are fitted with Velcro
fastening. Adjust
the headband to the
smallest size for
assembly. Fold the
nape protection at
the middle and start
to fasten in the nape
protection to the right
and left at the rear of
the helmet.
Ensure a flush fit.
For the assembly of a Dutch Ear
Neck protector it is recommended
to take out the head ring first,
assemble the Dutch Ear Neck
Protector and reassemble the head
ring.
Certification
Your helmet has been tested and
certified according to EN443:2008, visors according to EN14458:2004, goggles
according to EN166 .
The helmet is suitable for structural fire fighting and Hot Training.
Hot Trainings can damage the helmet which is not covered by the regular warranty.
It is recommended to provide separate helmets dedicated to Hot Training and use
Nomex hoods.