Bullard RXE - Handbuch (Seite 8)

©2012 Bullard. All rights reserved.
Sure-Lock is a registered trademark of Bullard.
6024460013D(0412)
ISO 9001
certified Americas:
E.D. Bullard Company
1898 Safety Way
Cynthiana, KY 41031-9303
Toll free: 877-BULLARD (285-5273)
Tel: 859-234-6616
Fax: 859-234-8987
www.bullard.com
Vertrieb Europa:
Bullard GmbH
Lilienthalstrasse 12
53424 Remagen • Germany
Tel: +49-2642 999980
Fax : +49-2642 9999829
[email protected]
www.bullardextrem.com
Distribution Asia-Pacific:
Bullard Asia Pacific Pte. Ltd.
LHK Building
701, Sims Drive, #04-03
Singapore 387383
Tel: +65-6745-0556
Fax: +65-6745-5
www.bullard.com
0299
Notified Body:
0299
FA PSA Prüf- und Zertifizierungsstelle
Zwengenbergerstrasse 68
42781 Haan
Options and Marking
Option Marking
Electrical properties classification
- wet helmet insulation test according to 6.8.2
E2
Classification Low temperature: -40°C ****
C: Classification liquid chemicals NaOH, HCe, H2SO4, O-Xylen
WARNING
The Helmet absorbs the energy of a blow by partial destruction of, or damage to, the helmet. Even though such damage may not be readily apparent, any helmet subjected to a
severe impact should be replaced. The protection provided by a helmet depends on the circumstances of an accident, and wearing a helmet cannot always prevent serious or
even fatal injuries or long-term invalidity. The safety intended to be provided by the helmet can only be ensured when it is properly assembled and correctly fitted. Removable
parts shall not be worn separately.
Always wear a correctly-adjusted helmet and straps, and always bear in mind that a helmet cannot protect the neck area or other unprotected areas of the head.
Ensure that wearing respiratory equipment does not affect the fit of the helmet and vice versa.
This helmet is only approved for use in fire service, rescue service and disaster control operations.
It is especially unsuitable as a sports or motorcycle helmet.