Clearaudio Double Matrix Professional Sonic - Handbuch (Seite 12)

Double Matrix Professional
Sonic
page /Seite 12  clearaudio electronic GmbH 2015
User manual
Bedienungsanleitung
Auto protect:
If the cleaning and vacuum assembly is open (Fig. 2, No. 13, page 7), all functions are deactivated.
Please note:
If you won’t be using the
Double Matrix Professional Sonic for more than a week, we suggest that you
drain the remaining fluid from the cleaning fluid reservoir. After that, you should flush the cleaning
fluid reservoir with 100 ml distilled water and then drain it. This ensures a safe recommissioning.
Important:
After use, the Double Matrix Professional Sonic should always turned off by pressing the
switch on the IEC socket to the position “0”.
9. Service
The standard warranty period for the Double Matrix Professional Sonic is two (2) years.
By returning your completed warranty card to Clearaudio within two weeks of purchase, you can
benefit from an extended warranty period of three (3) years.
The
Double Matrix Professional Sonic should only be repaired by the manufacturer during the warranty
period, otherwise the warranty will expire.
Regular visual inspection of a possibly defective insulation of the cable is also advisable for your own
safety. A damaged mains lead should be replaced immediately by an expert.
Servicing for all Clearaudio products must be done via your dealer.
To transport the Clearaudio Double Matrix Professional Sonic, always use the original packaging and be
sure to pack the unit exactly as it was delivered, by following the reverse of the procedure described in
‘
Set-up of the Double Matrix Professional Sonic’.
Disclaimer
Clearaudio assumes no liability for damage caused to records resulting from incorrect product handling.